Our understanding of stellar processes is based on our understanding of the Sun. We have studied the processes in the Sun and, with astronomical observations, developed models of how stars are born, live, and eventually die. If our understanding of the Sun is incorrect, then so too would our models of how stars develop.
In the early 1970s, neutrino flux measurements from the Sun seemed to suggest that our understanding of the Sun’s processes was incorrect. This was of great concern to astronomers and sparked what was called the Solar Neutrino Problem. The problem was that some of the predicted neutrinos were missing.
For more than 30 years, physicists and astronomers worked to solve this problem. Results were checked and rechecked. Various experiments were conducted using several techniques. However, initially, they all found that solar neutrinos were missing. It was not until 2001 that the missing neutrinos were found to be not missing at all; we were just looking in the wrong place.
This essay explores the experiment that first indicated that neutrinos were missing, though to the resolution of the problem and a little beyond. First, we should briefly describe what a neutrino is and then explore how they are formed in the Sun
What is a Neutrino?
Neutrinos are sub-atomic particles with no charge, and due to their nature, they interact weakly with other matter (NOBweb). As we will soon see, neutrinos are released when certain nuclear reactions occur in the Sun’s core. The Sun produces neutrinos at such a prodigious rate that 100 billion of them pass through an adult’s thumbnail every second. However, they interact with matter so weakly that a single neutrino has a one in 100 billion chance to interact with matter as it passes through the Earth. The low probability of a neutrino interacting with matter makes measuring them difficult. At the commencement of the first solar neutrino experiment, the standard particle model stipulated that neutrinos had no mass.
Standard Solar Model
The Standard Solar Model was developed during the nineteenth and twentieth centuries. It was based on observational evidence and what we can deduce from studies of related phenomena. One of the bases of this model is that the Sun is in thermal and hydrostatic equilibrium (Freedman and Kaufmann).
Observations have shown that the Sun is not becoming significantly hotter or cooler. This leads us to the conclusion that all heat generated in the Sun is radiated away at the same rate as it is produced. Also, the temperature increases with depth due to the known fact that compressed gasses become hotter. The temperature increases with depth but is constant at each depth. This is the equilibrium state.
Hydrostatic equilibrium is indicated by the fact that the Sun is neither collapsing nor expanding. At any particular layer the pressure from the overlaying material, including the layer itself, is the same as the upward pressure caused by escaping energy from the nuclear fusion reactions below.
Pressure and density increase with depth within the Sun, as indicated by the equilibrium state. To maintain this situation, energy generated by the sun must be removed by a transportation mechanism. In the sun, there are two mechanisms: convection and radiative diffusion. Conduction is also possible for heat transfer, but it is not considered an important mechanism. It is believed that radiative diffusion takes place within 71% of the Sun’s radius (Freedman and Kaufmann). In the upper 29%, convection takes place.
Solar models must consider thermal equilibrium, hydrostatic equilibrium, energy production, and the Sun’s transportation mechanisms. They must also be supported by observation of the Sun’s surface. One useful surface observation is helioseismology, which has been used to confirm certain Sun physical properties.
The standard solar models have given us important physical properties of the sun’s core. They show that the density is 160 000kgm-3, that the temperature is 1.5 x 107K, and that the pressure is 3.4 x 1011 atmospheres. The model has also demonstrated that 94% of the sun’s mass is within 0.5 radii of the centre and that energy production is limited to within the lowest quarter of the radius.
The sun’s energy production is via the conversion of hydrogen nuclei to helium. By far, the greatest process this is achieved through is the proton-proton (p-p) chain (98.5%.) Approximately 1.5% of the energy generated by the Sun is via the CNO cycle (Bahcall, Gonzalez-Garcia and Pena-Garay, 2003.) The overall p-p reaction is:
4p + –> 4He + 2e+ + 2ν e + <=25MeV
Every second, 600 million tons of hydrogen is converted to 596 million tons of helium (Miramonti, 2009.) The remaining 4 million tons are converted to energy, which, given that the Sun is in thermal equilibrium means that the Sun’s current luminosity is 4 x 1026W.
The dominant reactions in the p-p chain convert four hydrogen nuclei to helium, releasing 4.3 x 10-12 J of energy (shown as ppI in Fig 1.) The process does not use any intermediate elements. In this process, only the first stage results in a neutrino with a maximum energy of 0.42MeV (fig 2.) The measurement of the neutrino flux from this reaction constrains the overall rate of conversion of hydrogen to helium in the p-p chain (Haxton, 2007).
There are several side branches in the p-p chain (fig 1.) The two most common are called ppII and ppIII. The ppII and ppIII branches separate after the second step in the main branch (ie ppI.) The 3He collides with a 4He particle to form 7Be. The 7Be then either undergoes electron capture (ppII) or proton capture (ppIII.)
In the ppII branch, electron capture results in the production of a neutrino. The resultant neutrinos are at two energy levels: 0.38 and 0.86MeV, with the latter occurring in 90% of the cases (Haxton, 1995).
In the ppIII branch, the β decay of 8B releases a neutrino. This high-energy neutrino has a maximum energy of about 15MeV. Due to their high energies, the neutrons formed in this reaction are the most accessible.
Figure 1: The p-p chain reactions and their probability based on the standard solar model. The reactions producing neutrinos are highlighted in blue (adapted from Haxton (2007) and Miramonti (2009)).
Due to the energy barriers that must be overcome before nuclear fusion can occur (e.g. Coulomb barriers), the rate of each branch is sensitive to temperature. The rate of the ppII and ppIII branches can be determined by measuring the neutrino flux from 7Be and 8B.
There is also rarer branch that results in the highest energy neutrino (18.77MeV). This occurs when the 3He produced in the second stage of the p-p chain captures a proton. This is called the hep reaction. The flux from this reaction is low due to the low probability of it occurring (Bahcall and Pena-Garay, 2004).
Figure 2: Solar neutrino flux from p-p chain reactions based on the standard solar model. Flux units are cm-2 sec-1 MeV-1 for continuum sources and cm-2 sec-1 for line sources.
Source | Max energy (MeV) | Predicted flux (cm-2 s-1) |
pp | 0.42 | 5.99 x 1010 |
pep* | 1.44 | 1.42 x 108 |
hep | 18.77 | 8.04 x 103 |
8B | ~15 | 5.28 x 106 |
7Be* | 0.38 (10%), 0.96 (90%) | 4.65 x 107 |
Table 1: The energy and predicted flux of each reaction in the p-p chain producing neutrinos (adapted from Haxton (1995) and Bahcall and Pena-Garay (2004)). * line sources
Neutrinos are also produced in a process known as pep. In this process, two protons and an electron collide to produce 2H and a neutrino with an energy of approximately 1.44 MeV.
Unlike the photons produced in the reactions, neutrinos travel quickly out of the core and into space. This is due to them interacting weakly with other matter.
The Missing Neutrinos Experiments
Homestake
Raymond Davis conducted the first experiment to detect solar neutrinos. The project got underway after Bahcall showed that Davis’ proposed experiment would be sensitive to the high energy 8B neutrinos. The detection of neutrinos using chorine was first proposed by Pontecorvo and Alvarex (Haxton, 1995.)
The Homestake experiment used a radiochemical technique using perchloroethylene (C2Cl4,) a common cleaning fluid. The chemical was used as it was rich in chorine. When a neutrino interacts with a chlorine atom, a radioactive isotope of argon is produced in this equation:
37Cl + νe –> 37Ar + e–
The detector used a tank of 390 000L of C2Cl4 constructed in the Homestake Gold Mine in South Dakota. To negate the effects of any other solar radiation the detector was constructed at a depth of 1480m. The energy threshold for the generation of 37Ar is 814keV. At that threshold the detector was sensitive to 8B and higher energy 7Be neutrinos (as indicated in fig 2.) It also had sensitivity to neutrinos produced by the pep reaction and the CNO cycle.
The physical properties of 37Ar make it a useful medium. It is a noble gas that is easily removed from C2Cl4. Its half-life of 35 days gave a reasonable measurement time. Helium was circulated through the liquid to remove the gas at the end of each recording period. The gas was then processed, ending up in a charcoal trap. This was then heated and passed through a heated titanium filter to remove reactive gases. After further concentration through chromatography, the gas was then placed in a counter, and counting would continue for one year. When all factors were considered, the detector detected 25 neutrinos every year.
Due to the nature of this experiment, the direction from which the neutrino arrived could not be determined.
Bahcall’s calculations predicted a rate of approximately 7.6 SNU (1 SNU = I capture/second/1036 atoms) based on the standard solar model (Haxton, 1995.) The rate measured by Davis was 2.56 SNU (Miramonti, 2009). This rate was a third of the predicted value. This result gave birth to the Solar Neutrino Problem.
Three major areas were proposed to explain the discrepancy in Davis’ detector’s theoretical and observed neutrino captures. Bahcall checked and refined his neutrino production and capture model and found no significant errors. Likewise, Davis tested his detector in a number of ways and increased its sensitivity and he found no significant errors. The third was not taken seriously at the time when Bruno Pontecorvo and Vladimir Gribov proposed that neutrinos were not fully understood.
Kamiokande
The Kamiokande detector was originally built in the Kamioka Mine in Japan to study the stability of protons and neutrons (Haxton, 1995). It was later upgraded with the aim of studying solar neutrinos. The detector was later upgraded to increase its sensitivity from 7.5MeV to 7.0MeV. The detector was very sensitive at high energies (NOBweb).
The detector utilised 4500 tonnes of highly purified water and photomultiplier tubes (PMTs) to measure Cherenkov radiation. In this experiment, the Cherenkov radiation was the light emitted as an electron recoils after a neutrino – electron collision due to it having a velocity greater than the speed of light in water. The inner 4140 tons of water was monitored by 948 PMTs. The outer 1.5m of water served as an anti-counter and was monitored by 123 PMTs. Only the events in the inner-most 630 tons of water were observed to eliminate any gamma-ray events. The imaged volume is known as the fiducial volume.
Due to the detector’s high energy threshold, it was sensitive to 8B neutrinos at the higher end of their spectrum. It detected both electron and muon neutrinos with a ratio of 7:1, respectively.
The Kamiokande experiment had a few advantages over the Homestake experiment. The most important of these was that the direction from which the observed neutrino had originated could be determined. Over the course of the experiment, it was clearly demonstrated that the neutrinos originated from the Sun. Also, the energy of the arriving particles could determined. The spectrum of the neutrinos agreed with the predicted spectrum of the 8B neutrino spectrum. The experiment also gave real-time results.
Like the previous Homestake experiment, Kamiokande found that the neutrino flux was less than expected. After 1040 observing days, the flux was found to be 46% of that predicted from the standard solar model (Hirata et al., 1990). The data was checked for error, but no significant errors were found. The data in the result covers two reported periods. The first from 1978 to 1988 (450 observing days) gave a result of 45%. The second period between 1988 and 1990 (590 observing days) resulted in a flux of 45% of the predicted flux.
The observed number of events was higher than in the Homestake experiment due to the nature of the detector. This is because the Homestake detector only had sensitivity to electron-neutrinos. The Kamiokande detector had some sensitivity to the other types of neutrinos, hence the higher measured flux.
GALLEX
As stated in the section on the standard solar section, the initial stage of the p-p chain gives the overall p-p chain reaction rate. For that reason, it is important to measure the flux from this reaction. The two radiochemical experiments (GALLEX and SAGE) were designed for this purpose.
The Gallium Experiment (GALLEX) was undertaken in the Gran Sasso Laboratory in Italy at a depth of 3300m. It was operational from 1991 to 1997. After maintenance of the chemical plants and electronics, the detector recommenced operations under the name GNO (Gallium Neutrino Observatory), which is still operational.
The detector used 101 tons of GaCl3 solution in water and hydrochloric acid. The solution contained 20.3 tons of natural gallium (Haxton, 1995.) When a neutrino interacts with a gallium atom a radioactive germanium atom is produced via the reaction below. The half-life of the Ge is 16.5 days (Bellerive, 2003).
71Ga + νe –> 71Ge + e–
With a threshold of 233keV this detector was sensitive to the higher energy pp neutrinos. This was important as Bahcall thought he could more accurately determine the number of low energy events as the flux of neutrinos is constrained by the luminosity of the Sun. Calculations showed that the measured events in the detector were 53% from pp neutrinos, 27% from 7Be neutrinos, 12% from 8B neutrinos and 8% from CNO neutrinos.
Like the Homestake experiment, the two gallium detectors had a run of a set period and, therefore, were not real-time detectors. At the end of a run (about 3 weeks) nitrogen gas was pumped through the solution to extract the 71Ge. It was then converted to GeH4 and placed in the counters with xenon gas. The sample was then observed for six months. The results showed that two peaks at 10.4keV (K peak) and 1.2kev (L peak.) These were used to compare the results to natural radiation.
An important feature of these detectors is that they can be calibrated using terrestrial sources. The GALLEX detector was calibrated using a 51Cr source.
The original GALLEX experiment measured a flux of 77.5 SNU over 65 runs. Under GNO, a flux of 65.2 SNU was measured. Combining the two results is 70.8 SNU over 100 runs taken over 2834 observing days. The standard solar model predicts a flux of 129 SNU (Bellerive, 2003.) The measured flux was 55% of what was expected.
SAGE
The Russian-American Gallium Experiment (SAGE) was built in the Baksan Neutrino Observatory in the northern Caucasus Mountains in Russia. The detector was at a depth of 4700m and used 50 tons of liquid metallic gallium (Haxton, 1995).
The detector was sensitive to the same energy level and to the same neutrinos as the GALLEX experiment. The 71Ge was extracted by vigorously mixing the target with a mixture of hydrogen peroxide and dilute hydrochloric acid. This produced an emulsion where the germanium is first oxidized before being dissolved by the hydrochloric acid. The germanium is then extracted as GeCl4, purified, concentrated, and converted to GeH4. The extraction of the germanium is about 80% efficient. The radioactive decay of the germanium is then conducted in the same manner as in the GALLEX experiment.
As with the GALLEX experiment, SAGE found a neutrino flux less than that predicted by the standard solar model. The measured flux was about 64.5 SNU, or approximately 50% of the predicted value.
Super-Kamiokande
Super-Kamiokande was a follow up to the Kamiokande experiment. Its main aim was to study atmospheric and solar neutrino oscillations. As with Kamiokande the detector was an imaging water Cherenkov detector constructed in the Kamioka mine in Japan. The project underwent two phases separated by remedial measures following an accident involving the explosion of PMTs (Cravens et al, 2008).
The detector contained 50,000 tons of continually purified ultra-purified water. The outer detector provided a shield for cosmic ray muons and external low-energy background. The outer detector was monitored with 1885 PMTs. The inner detector contained 30,000 tons of water with a fiducial volume of 25,000 tons. The inner detector was monitored by 11,146 PMTs. Measures were taken to minimise background events caused by radon emitted from the surrounding rock.
With an energy threshold of 5MeV (for the early part of the experiment the threshold was 6.5MeV) the detector was sensitive to neutrinos resulting from the β decay of 8B. One part of the experiment was to test if there was variation in events between night and day to test a prediction that neutrinos underwent oscillation as they passed through Earth. Due to its large volume the detector provided highly accurate measurements of neutrino flux.
After 1496 observing days, the measured flux (2.35 x 106 cm-2 sec-1) from phase one was 46.5% of that expected from the standard solar model (Hosata et al., 2005). The experiment also found that variations in the flux varied due to the eccentricity of the Earth’s orbit.
The second phase produced similar results. The measured flux was 2.38 x 106 cm-2 sec-1 (Cravens et al., 2008). Although uncertainties still allowed for the flux to be the same for both night and day, the study found that the flux appeared to be higher during nighttime.
SudburyNeutrino Observatory
The Sudbury Neutrino Observatory (SNO) is a 1 000 ton heavy-water Cherenkov detector. It was constructed in the Creighton Mine in Canada at a depth of 2 000m.
It differs from the Kamiokande detectors by the use of heavy-water (D2O.) The vessel holding the heavy water is surrounded by an array of 9 456 PMTs. The cavity around the detector is filled by 7 000 tons of ultra pure water providing support and shielding.
The detector is mainly sensitive to 8B neutrinos. and mainly to electron-neutrinos but the use of heavy water allowed some sensitivity to muon- and tau-neutrinos. The electron-neutrinos are detected by a charged-current (CC) interaction while the other two neutrino types are detected through neutral-current (NC) and elastic scattering (ES) interactions:
CC: d + νe –> p + p + e– specific to electron-neutrinos
NC: d + νx –> n + p + νx where x = e, μ or τ
ES: ν x + e– –> νx + e– predominately electron-neutrinos
For the first time the NC interactions were observed in this experiment. This was important as this interaction measures the total flux of neutrinos.
Detection of the rates at which each reaction occurs can determine if neutrinos oscillate on their journey from the Sun’s core to Earth. The determination of which neutrinos react is given from the following relationships:
Φ CC = øe
Φ ES = øe + 0.15øμτ
Φ NC = øe + øμτ
These relationships show that CC interactions occur only with electron-neutrinos, ES with predominately electron-neutrinos but also with the other two flavours and NC with all neutrino types.
The vessel contained pure heavy water in the first of three phases of the SNO experiment. Cherenkov light is produced when neutrons are captured. The energy threshold was about 5MeV. The results of this stage were as follows:
Φ CC = ~1.76 x 106 cm-2 sec-1
Φ ES = ~2.39 x 106 cm-2 sec-1
Φ NC = ~5.09 x 106 cm-2 sec-1
The higher value of ΦNC over the other two interactions indicates neutrino oscillation. Furthermore, the measured ΦNC was close to the predicted 8B neutrino flux (~5.05 x 106 cm-2 sec-1) by the standard solar model. This was clear statistical evidence for neutrino oscillation. This phase did not find any clear evidence of a variation between day and night in the neutrino flux.
The second phase of the SNO project used heavy water with about 2 tons of NaCl added to enhance neutron detection. The addition of the salt also provided a more accurate measure of the NC interactions by eliminating some assumptions about the CC and ES energy spectra. The results were comparable with the first stage of the experiment and provided further evidence that neutrino oscillation does occur. The results from this stage were as follows:
Φ CC = ~1.59 x 106 cm-2 sec-1
Φ ES = ~2.21 x 106 cm-2 sec-1
Φ NC = ~5.21 x 106 cm-2 sec-1
The third and final phase of the project used 3He proportional counters immersed in the heavy water (Aharmim, 2008). Thirty six active ‘strings’ of detectors were used. This arrangement allowed for a more accurate measurement of the NC interactions and, hence, the total solar neutrino flux. The result was in agreement with the other two phases of the experiment:
Φ NC = ~5.54 x 106 cm-2 sec-1
The SNO experiment provided the answer to the solar neutrino problem.
Neutrino Oscillations
What SNO proved was that neutrinos change, or oscillate, as they travel between the core of the Sun and Earth. The electron-neutrino emitted in the core can change to muon- and tau-neutrinos. An important implication is that neutrinos are not mass-less as the standard particle model dictates.
In 1978, Wolfenstein proposed that neutrino oscillations take place within the sun. This occurs due to the forward scattering of neutrinos. This could occur even if the neutrinos were mass-less. The model has been subsequently improved through the work of Mikheev and Smirnov such that the oscillations can exhibit resonance behaviour due to the propagation through matter with different densities. The effect is known as the Mikheyev – Smirnov – Wolfenstein (MSW) effect. The effect is particularly strong on electron-neutrinos as they can propagate ‘while having charged-current [CC] interactions with electrons in addition to the neutral-current [NC] interactions.’ However, this process is only significant at higher neutrino energies, so it didn’t explain why low energy neutrinos also appear to oscillate.
At lower energies, neutrinos undergo vacuum oscillation. For this to occur the different states must have finite masses. Neutrinos can be described in terms of their mass or by the particles that they are associated with (ie electron, muon or tau. The relationship between these two descriptions are constrained in what are called mixing angles. For oscillation to occur, each favour must have different masses. This allows for changes as a neutrino passes through a vacuum, and the probability that a neutrino will oscillate is based on its energy and the distance travelled. The measurement of the mixing angle started in the SNO project and is still being refined.
As we will see shortly there is a transition between the low energy mass-related oscillations and the low energy vacuum oscillations.
Following Experiments
Following the SNO experiment, the nature of neutrino oscillation has been continued to be studied.
KamLAND
The detector used in the KamLAND experiment is housed in the cavern excavated for the original Kamiokande experiment. It consists of 1 000 tons of liquid scintillator within a container immersed in non-scintillating oil and surrounded by 1879 PMTs (Araki et al, 2004.) The instrument is contained within a 3 200 ton water-Chenenkov detector to shield it from gamma rays and neutrons and identifying cosmic ray muons.
The detector measured the flux of anti-neutrinos emitted from nuclear reactors that surrounded it. The flux from the reactors could be determined and hence the number of expected events in the detector could be deduced. When an anti-neutrino interacts with the scintillator an inverse β decay reaction occurs with an energy threshold of 1.8MeV:
Anti-neutrino + p –> e+ + n
Over a period of 766 ton-years the experiment observed 258 anti-neutrino events as opposed to the predicted 365 events if there was no oscillation present (Araki et al, 2004.) Arake et al (2004) concluded that neutrino oscillation was due to MSW effect and that it corresponds directly to neutrino oscillation in a vacuum. Evidence for this comes due to the distortion of the energy spectrum of the observed anti-neutrinos. Furthermore, it eliminated all but the large mixing angle solution of MSW (LMA-MSW).
Borexino
This experiment is significant because it measured 8B neutrinos at lower energy levels than in previous experiments (Bellini, 2008). The LMA-MSW theory dictates that at energies below 2 MeV, vacuum oscillations should dominate, and at energies above 5 MeV, matter-driven oscillations should dominate. Between the two, there should be a smooth transition. A feature of this experiment is that this could be tested.
The Borexino detector is similar to the KamLAND detector. It consists of a nylon vessel containing 278 tons of liquid scintillator. The vessel is surrounded by 2212 PMTs, which are contained in a 2 100 ton water Cherenkov detector with 208 PMTs. The detector was carefully shielded to isolate it from background radiation to allow detection of lower-energy events. It has an energy threshold of 2.8MeV.
Over 246 days of observations, it measured a flux of approximately 2.65 x 106 cm-2 sec-1, which was in agreement with the LMA-MSW. In effect, the experiment demonstrated that there is a transition between matter-driven neutrino oscillations and oscillations in a vacuum, as described in the LMA-MSW theory.
Recent and Ongoing Experiments
The nature of neutrino oscillation is still an active area of study. The K2K project used a beam of muon-neutrinos fired at the Super-Kamiokande detector 250km away (Ahn et al, 2006). They studied oscillation parameters (predominantly between muon- and tau-neutrinos.) The results were consistent with oscillations observed in atmospheric neutrinos generated from cosmic rays.
The MINOS experiment used a muon-neutrino source 720km from Fermilab. After an exposure period of two years, it found that a given neutrino type disappeared due to oscillation (Adamson et al., 2008).
Work is still ongoing for the OPERA experiment which is housed in the same laboratory as the GALLEX experiment (Lutter, 2009). They studied tau-neutrino interactions using a neutrino source originating at CERN 730 km away. To do this, they use a nuclear emulsion and look at muon-neutrino to tau-neutrino oscillations. They also hope to study muon-neutrino to electron-neutrino oscillations.
Conclusion
From our understanding of the processes that occur in the Sun, we can determine the number of solar neutrinos that pass through a given area. This idea was the foundation for testing whether our understanding of solar processes was correct. If we could measure the correct number neutrinos we would have direct physical proof that our models are correct. This was important as prior to the solar neutrino experiments all our modelling and calculations were mainly from observations rather than measurements.
The early radiochemical experiments indicated a deficit in neutrino triggered events in the detectors. In the case of Homestake the results were about a third of what was expected due to only being sensitive to electron-neutrinos. The following water-based experiment (ie Kamiokande) resulted in about 45% due to being partly sensitive to other neutrino types.
The radiochemical gallium experiments of GALLEX and SAGE were sensitive to lower-energy neutrinos from the pp reaction. However, the results were still less than expected, at 55% and 50%, respectively. These experiments demonstrated that both high- and low-energy neutrinos were missing.
The larger water-based experiment of Super-Kamiokande still found only 46% of the neutrinos expected.
The missing neutrinos were a great concern to astronomers and physicists alike. The experiments were designed to test the standard solar model. However, the number of neutrinos was not as expected. The idea that the model was wrong did not fit with other observations. It appeared that our understanding of the way neutrinos behaved was not quite correct.
The heavy-water SNO experiment conclusively found that, indeed, our understanding of neutrino physics was incomplete. The experiment found the missing neutrinos and gained insight into the processes that changed the neutrinos as they travelled from the core of the Sun to the Earth. This discovery had the implication that neutrinos were not mass-less as previously stipulated in the standard particle mode. The standard particle model had to change.
Since the completion of the SNO experiment, other projects have further constrained our understanding of neutrinos and how they oscillate as they travel through both matter and a vacuum. It turns out that neutrinos with energies above 5MeV are predominately changed to other types of neutrinos in matter (i.e. within the sun.) For particles with energies less than 2MeV they oscillate predominately in the vacuum between the Sun and Earth. Between the two, there is a smooth transition. This behaviour is described in the LMA-MSW theory.
I found astronomy while working in dark rural locations. Initially, I explored the night sky and learnt the constellations before purchasing a pair of binoculars to further my knowledge of the sky.
My first telescope was a 200 mm Newtonian reflector on an equatorial mount. I found that this telescope had a steep learning curve but was a rewarding experience.
As time progressed, I became interested in astrophotography. This resulted in purchasing a 110 mm refracting telescope and a dedicated monochrome-cooled astronomical camera. This resulted in another very rewarding steep learning curve that far surpassed the experience with my first telescope.
I have joined Telescope Guru to share my knowledge of telescopes and astronomy.
- Formation of the Moon - November 25, 2024
- Lunar Rilles: What are They? - November 9, 2024
- Why Is Astronomy Important? - November 2, 2024
Related Posts:
- Why Is Astronomy Important?
- What are Stellar-Mass Black Holes?
- Formation of the Moon
- How Do Stars Shine: The Astonishing Journey of…
- Observing Guide: November and December 2024
- Why Does The Moon Shine?
- Lunar Rilles: What are They?
- Space Weather
- Why Do Planets Orbit The Sun?
- Why do Sunspots Appear Dark in Pictures of the Sun?